If you are pricing a building, a borehole, an estate drainage network or a factory water line, the PVC pipe price in Nigeria is one of the first numbers you need, and one of the hardest to pin down. Ask three dealers in Orile, Oyingbo or Ota for a 4-inch pipe, and you can get three different answers, sometimes thousands of naira apart, for pipes that look the same in the shop.
The gap is rarely random. It comes from diameter, wall thickness, pressure rating, length, resin quality, and how far the pipe has traveled through distributors before it reached you. Once you understand those factors, you can compare quotes properly, buy at wholesale level, and lower the total cost of your project, not just the price per length.
This guide covers:
- Current PVC pipe prices in Nigeria by diameter, wall thickness, and pressure class
- The standard lengths sold in the Nigerian market and how length changes your cost
- How PVC compares with uPVC, CPVC/PPR and galvanized iron (GI) pipes
- What drives price changes: PVC resin, the naira exchange rate, local manufacturing and bulk orders
- A practical buying checklist for plumbers, contractors, procurement officers and retail buyers
- How to buy directly from a manufacturer such as ALL TIME PIPES, a product of All Time Packaging Nigeria Ltd in Sango Ota, Ogun State
Prices in this guide are indicative market ranges for November 2026 in the Lagos and Ogun axis. Prices change with resin costs and the exchange rate, so always confirm with a current quotation before you budget.
PVC Pipe Price in Nigeria Today: The Quick Answer
As of November 2026, PVC pipes in Nigeria sell for roughly ₦600 to ₦2,500 per length for ½-inch (20mm) pipes, ₦3,500 to ₦25,000 for 4-inch (110mm) pipes, and ₦8,000 to ₦40,000 or more for 6-inch (160mm) pipes, depending on wall thickness, pressure rating, length, and brand. Thin drainage pipes sit at the bottom of each range. Thick pressure and borehole casing pipes sit at the top.
Market listings show how wide the spread is. In Lagos, retail listings for a 4-inch PVC pipe range from about ₦4,000 to ₦6,000 for 3mm-wall pipes, while a 4-inch pressure pipe with a 5mm wall lists at about ₦25,000. A 6-inch, 3mm drainage pipe in a 3-meter length lists at about ₦12,000 in Lagos.
Three rules explain most of the difference:
- Wall thickness drives price more than diameter. A thick 4-inch pressure pipe can cost four to five times as much as a thin 4-inch drainage pipe.
- Length matters. Some dealers quote per 3-meter length, others per 5.8 or 6-meter length. Always ask which.
- Your position in the supply chain matters. Buying from a manufacturer or first-level distributor removes one or two layers of markup.
Understanding PVC Pipe Sizes, Wall Thickness and Pressure Classes
Before you compare any PVC pipe price in Nigeria, make sure every quote describes the same pipe. Three specifications decide what you are paying for: outside diameter, wall thickness, and pressure class.
Diameter: inches vs millimeters
Nigerian dealers often quote in inches, while manufacturers produce to metric outside diameters (OD). Use this conversion so you do not compare a 50mm pipe with a 63mm pipe because both were called “2-inch.”
| Trade name (inches) | Outside diameter (mm) | Common uses |
|---|---|---|
| ½” | 20 | Water supply points, taps, electrical conduit |
| ¾” | 25 | Water supply branches, conduit |
| 1″ | 32 | Main supply into buildings, pump delivery |
| 1¼” | 40 | Wash-hand basin and sink waste |
| 1½” | 50 | Shower and kitchen waste, small borehole risers |
| 2″ | 63 | Waste lines, borehole column pipes, irrigation mains |
| 2½” / 3″ | 75 / 90 | Soil and vent stacks, rainwater downpipes |
| 4″ | 110 | Toilet soil lines, building drainage, borehole casing |
| 5″ | 140 | Borehole casing, estate drainage |
| 6″ | 160 | Borehole casing, sewer and storm lines |
| 8″ | 200 | Estate sewers, culverts, industrial drainage |
Wall thickness: light, medium and thick
In the Nigerian market, pipes are sold by wall thickness in millimeters and by grade names such as light, semi-thick (medium), and thick (heavy). ALL TIME PIPES, for example, produces its standard range in light, semi-thick and thick categories. A thicker wall uses more resin per meter, so it costs more, carries more pressure, and resists crushing and impact better.
Pressure class: PN rating and SDR
Pressure pipes are rated in bar using a PN number (PN6 = 6 bar, PN10 = 10 bar, PN16 = 16 bar). The rating depends on the ratio of diameter to wall thickness, called the SDR. Under ISO 1452, a 110mm (4-inch) uPVC pipe needs roughly these walls:
| Pressure class | SDR | Wall thickness, 110mm pipe | Typical use |
|---|---|---|---|
| Non-pressure / drainage | Varies | 2.0 to 3.0mm | Soil, waste, rainwater, vent |
| PN6 (6 bar) | 41 | about 2.7mm | Low-pressure gravity mains |
| PN10 (10 bar) | 26 | about 4.2mm | Building water supply, pumped lines |
| PN16 (16 bar) | 17 | about 6.6mm | High-pressure mains, deep borehole columns |
The practical lesson: a 4-inch pipe with a 3mm wall is a drainage pipe, not a pressure pipe. If a quote for a “pressure pipe” looks far below the market, check the wall thickness with a caliper before you pay. Using drainage-grade pipe on a pumped line is one of the most common causes of burst pipes and repeat plumbing work in Nigeria.
Sample PVC Pipe Price List in Nigeria (November 2026)
The table below shows indicative retail prices per 3-meter length in the Lagos and Ogun market. Use it to sanity-check quotes and build a first budget, then request a firm quotation for your exact specification and quantity.
| Size (inches) | OD (mm) | Light/drainage (₦ per 3m) | Medium / semi-thick (₦ per 3m) | Thick / pressure (₦ per 3m) |
|---|---|---|---|---|
| ½” | 20 | 600-1,000 | 900-1,500 | 1,500-2,500 |
| ¾” | 25 | 700-1,200 | 1,000-1,800 | 1,800-3,000 |
| 1″ | 32 | 900-1,500 | 1,500-2,500 | 2,200-4,000 |
| 1¼” | 40 | 1,200-2,000 | 2,000-3,000 | 3,000-5,000 |
| 1½” | 50 | 1,500-2,300 | 2,300-3,500 | 3,500-6,000 |
| 2″ | 63 | 1,800-2,800 | 2,800-4,000 | 4,500-8,000 |
| 3″ | 90 | 2,800-4,000 | 4,000-6,000 | 7,000-11,000 |
| 4″ | 110 | 3,500-5,000 | 5,000-7,500 | 10,000-18,000 |
| 5″ | 140 | 6,000-9,000 | 9,000-13,000 | 15,000-25,000 |
| 6″ | 160 | 8,000-12,000 | 12,000-17,000 | 18,000-30,000 |
| 8″ | 200 | 14,000-20,000 | 20,000-30,000 | 35,000-55,000 |
How to read this table:
- Light/drainage pipes are for soil, waste, vent, and rainwater lines that carry no pump pressure.
- Medium / semi-thick pipes suit general building water supply and protected underground runs.
- Thick / pressure pipes include pressure-rated supply pipes, borehole casing and column pipes, and heavy underground drainage.
- For a 5.8 to 6-meter length, budget roughly 1.9 to 2 times the 3-meter price.
- Wholesale prices from a manufacturer or first-level distributor usually fall below these retail ranges. The discount depends on volume, payment terms, and delivery distance.
Fittings and accessories (budget separately)
Pipes are only part of the bill. Elbows, tees, couplings, reducers, end caps, clips, solvent cement, and labor can add a significant share to the plumbing materials budget. Common retail benchmarks in Lagos include PVC solvent cement at about ₦8,500 per tin, and 4-inch elbows and other fittings from a few hundred naira each. Price your fittings in the same order as your pipes so the joints match the pipe class.
Prices compiled from Lagos and Ogun market listings and online building-material stores, checked in November 2026. They are indicative and will change with resin and exchange-rate movements. For a firm, current price, request a quotation from ALL TIME PIPES.
Common PVC Pipe Lengths in Nigeria and How They Affect Cost
PVC pipes in Nigeria are commonly sold in these lengths:
| Length | Approx. feet | Where you see it |
|---|---|---|
| 3 meters | about 10ft | Retail drainage and waste pipes, small jobs, easy transport |
| 3.5 to 4 meters | 11 to 13ft | Some dealer-cut and conduit lengths |
| 5.8 to 6 meters | about 19 to 20ft | Pressure pipes, borehole casing, project and wholesale orders |
| Custom lengths | as specified | Factory orders for projects, borehole depths, pre-cut site runs |
Length affects your total cost in three ways:
- Price comparison. A ₦5,000 quote per 3m length and a ₦9,000 quote per 6m length are not the same deal. Convert every quote to a price per meter before you decide.
- Joints and fittings. Longer pipes mean fewer couplings, less solvent cement, fewer leak points and less labor time on long runs such as estate mains or borehole columns.
- Waste and transport. Short lengths are easier to carry on a pickup, while long lengths cut offcut waste on straight runs. Factory custom lengths can reduce both, because pipes arrive sized to the job.
If your project has repetitive runs (for example, the same riser height in every block of an estate, or a fixed borehole depth), ask your supplier whether they can produce custom lengths. Manufacturers with their own extrusion lines, such as ALL TIME PIPES in Sango Ota, can do this for bulk orders.
PVC vs uPVC vs GI Pipes: Price and Performance Compared
First, a point that confuses many buyers: in Nigeria, most rigid white or gray “PVC” plumbing pipes are actually uPVC (unplasticized PVC). uPVC is the rigid, pressure-capable material used for water supply, drainage and borehole casing. Flexible PVC, which contains plasticizers, is used for hoses and is not a substitute for rigid plumbing pipe. When a dealer says “PVC” and “uPVC,” ask for the wall thickness and pressure class, because that is what you are really comparing.
| Factor | Rigid PVC / uPVC | CPVC / PPR | Galvanized iron (GI) |
|---|---|---|---|
| Typical 2″ price per length | about ₦2,000-8,000 by wall class | Higher than uPVC; ¾” CPVC from about ₦8,800 | about ₦15,000-22,500 |
| Corrosion | Does not rust | Does not rust | Rusts over time, especially with borehole water |
| Weight and handling | Light; one person can carry several lengths | Light | Heavy; needs more labor and threading tools |
| Jointing | Solvent cement or threaded joints | Solvent cement (CPVC) or heat fusion (PPR) | Threading and sealing |
| Hot water | Not for hot water | Designed for hot and cold water | Handles hot water |
| Best use | Cold water supply, drainage, sewer, borehole casing, conduit | Hot water lines, high-end interiors | Exposed lines needing impact strength, tank stands, fire lines (by specification) |
GI price references: 2″ galvanized pipe listings in Lagos at ₦15,000 to ₦22,500; ¾” CPVC pipe at about ₦8,800.
What this means for your budget: for cold water supply and all drainage work, uPVC usually delivers the lowest total cost. The pipe is cheaper per length, it is faster to install, it does not corrode, and it is light to transport. Reserve CPVC or PPR for hot water lines and GI for places where a specification or exposure demands steel.
What Drives PVC Pipe Prices in Nigeria
PVC pipe prices in Nigeria move with a few forces. Knowing them helps you time purchases and judge whether a price increase is real or opportunistic.
1. PVC resin costs
Resin is the largest single input in a PVC pipe. Nigeria has no meaningful local production of primary PVC resin, and an estimated 85 to 95 percent of supply is imported, mostly from Asian and Middle Eastern producers. The same analysis puts the average import price at about $1,695 per ton in 2024, up 42 percent from the year before. When global resin prices rise, Nigerian pipe prices follow within weeks.
2. The naira exchange rate
Because resin is bought in dollars, the exchange rate is the biggest swing factor in local pipe prices. In early November 2026, the dollar traded at about ₦1,349 at the official window and about ₦1,400 on the parallel market, more stable than the swings of 2023 and 2024. A stronger, steadier naira eases cost pressure, but any sharp depreciation feeds straight into the next price list.
3. Local manufacturing vs imports
Pipes made in Nigeria avoid the freight, duty and port charges on finished imported pipe, which is bulky and expensive to ship. Most large PVC pipe makers cluster in the Lagos and Ogun industrial belt, close to the ports where resin lands. Buying from a local manufacturer shortens the supply chain and gives you more stable pricing and availability.
4. Resin quality and additives
Virgin pipe-grade resin produces stronger, more consistent pipes. Some low-cost pipes include recycled material or high levels of chalk (calcium carbonate) filler. These cost less to make, but they are more brittle, crack under impact and fail earlier. A pipe that is cheap per length but fails in three years is expensive per year of service.
5. Logistics and energy
Diesel prices, power costs at the factory and haulage distance all add to the final price. A pipe that travels from a factory in Ota to a distributor in Lagos, then to a dealer in your town, carries transport and handling costs at each step.
6. Demand and season
Construction activity peaks in the dry season, roughly November to March. Demand from estates, borehole drillers and government projects in this window can tighten supply and firm up prices. Locking in prices early for a project helps.
7. Order volume and buying channel
Volume is the one price factor you control. Bundle and truckload orders, direct factory purchases and steady repeat orders all earn better prices than buying a few lengths at a time from a retail shop.
How to Buy PVC Pipes Wholesale in Nigeria and Reduce Total Project Cost
The cheapest pipe per length does not always give the cheapest project. Total project cost includes the pipes, fittings, transport, labor, wastage, and the cost of repairs if something fails. These nine steps lower all of them.
1. Match each line to the right pipe class
Use light pipes for gravity drainage, medium pipes for general supply, and thick pressure pipes only where there is pump pressure or deep burial. Over-specifying drainage wastes money. Under-specifying a pumped line leads to bursts and rework.
2. Do a full take-off and buy once
List every pipe size, class and length for the whole project, including fittings. One consolidated order earns a better unit price and one delivery charge, instead of many small trips to the market.
3. Buy from the manufacturer or a first-level distributor
Every layer between the factory and your site adds a margin. For project and bulk quantities, contact the manufacturer directly and request its wholesale price list.
4. Compare quotes on the same basis
Convert each quote to naira per meter for the same outside diameter, wall thickness and pressure class. Ask whether delivery, offloading and VAT are included.
5. Negotiate on volume, terms and delivery
Ask for bundle or truckload pricing, a price hold for phased projects, and scheduled deliveries matched to your construction stages. Repeat buyers such as plumbing contractors and hardware dealers should ask about standing distributor terms.
6. Use full or custom lengths on long runs
On mains, borehole columns and estate drainage, 6-meter or custom lengths cut the number of joints, fittings and labor hours, and reduce offcut waste.
7. Buy matching fittings and solvent cement
Fittings that match the pipe class and diameter tolerance give tight joints the first time. Mismatched fittings are a common cause of leaks and callbacks.
8. Store pipes correctly on site
Stack pipes flat on level supports and keep them out of direct sun. Long sun exposure can weaken and discolor PVC, and poorly stacked pipes can warp.
9. Inspect every delivery
Check wall thickness with a caliper, look for the manufacturer’s markings, and reject pipes with cracks, bubbles or uneven walls before they reach the trench.
Worked example: what wholesale buying can save
Here is an illustrative pipe order for a block of six flats, priced at the middle of the retail ranges in the table above. It assumes a factory quote 12 percent below retail; your actual discount will depend on volume and terms.
| Item | Qty (3m lengths) | Retail mid-price (₦) | Retail total (₦) | At 12% below retail (₦) |
|---|---|---|---|---|
| 4″ (110mm) medium | 40 | 6,250 | 250,000 | 220,000 |
| 2″ (63mm) medium | 30 | 3,400 | 102,000 | 89,760 |
| 1″ (32mm) thick | 20 | 3,100 | 62,000 | 54,560 |
| ½” (20mm) thick | 60 | 2,000 | 120,000 | 105,600 |
| Total | 150 | 534,000 | 469,920 |
That is about ₦64,000 saved on pipes alone for one building, before counting a single consolidated delivery, fewer fittings from longer lengths, and avoided repairs. On an estate of 20 such blocks, the same approach saves over ₦1.2 million.
PVC Pipe Buying Checklist
Use the checklist that matches your role before you place an order.
Checklist for plumbers
- Confirm the outside diameter in millimeters, not only the inch name
- Match wall thickness and pressure class to each line (drainage, supply, pumped)
- Check the pipe is straight, has an even wall, and has a smooth inner surface
- Buy fittings and solvent cement that match the pipe class
- Ask whether the supplier can deliver to site on short notice for urgent jobs
For contractors and procurement officers
- Prepare a full bill of quantities: size, class, length and quantity per line
- Request written quotations from at least two manufacturers or first-level distributors
- Compare quotes per meter, with delivery, offloading, and VAT stated
- Ask for evidence of quality: product standard, certifications and the resin used (virgin or recycled)
- Confirm production capacity and lead time for your full volume
- Ask about custom lengths, price holds, and scheduled deliveries for phased work
- Agree on an inspection and replacement process for damaged or defective pipes
- Visit the factory or warehouse for large or government-funded projects
Retail buyers and homeowners
- Know what the pipe is for: water supply, toilet and drainage, borehole, or electrical conduit
- Ask your plumber for the exact sizes and thickness before you go to market
- Press the pipe end and look at the wall: very thin or flexible walls mean light drainage grade
- Ask whether the price is per 3m or per 6m length
- Buy from a known manufacturer or its authorized dealer to avoid substandard pipes
- Keep your receipt and ask about the supplier’s guarantee
For hardware dealers and distributors
- Request the manufacturer’s dealer or distributor price list and minimum order
- Ask about delivery to your shop and the payment terms available
- Stock the fast-moving sizes (½”, ¾”, 2″, 4″) in more than one wall class
- Confirm the supplier can restock steadily through the dry-season peak
Buying Direct from a Local Manufacturer: ALL TIME PIPES, Sango Ota
If you want factory-direct PVC pipe prices in Nigeria, ALL TIME PIPES is a practical example of what to look for in a supplier. It is the PVC pipe brand of All Time Packaging Nigeria Ltd, a CAC-registered plastics manufacturer with more than 15 years in production, operating from Sango Ota, Ogun State, at the heart of the Lagos and Ogun industrial corridor.
What ALL TIME PIPES produces
| Product line | Size range | Built for |
|---|---|---|
| Standard PVC pipes | 20mm to 200mm, in light, semi-thick and thick grades | Residential and commercial plumbing, water drainage |
| Premium PVC pipes | 20mm to 200mm, extra-thick walls | Large projects, industrial use, high-pressure water supply |
| All Time Borewell pipes | 63mm to 200mm, solvent-cement or threaded joints | Borehole casing and column pipes (column pipes rated for depths up to 1,200 feet), irrigation, drinking water supply |
| All Time Heavy and Thick pipes | 63mm to 200mm | Underground drainage, sewer, rainwater, public utility networks |
| All Time Dignity conduit pipes | 20mm and 25mm, in blue, sky blue and cream | Concealed electrical wiring in homes and offices |
Why builders, plumbers and procurement teams choose ALL TIME PIPES
- Factory-direct wholesale pricing. You buy from the manufacturer, not through two or three trading layers, so more of your budget goes into pipe and less into margins.
- Capacity for large orders. The factory has capacity to produce over 30,000 metric tons of PVC pipes and fittings a year, enough to supply estates, infrastructure and government projects without shortages, including through the dry-season peak.
- Bulk orders and custom lengths. Projects with repeated runs or fixed borehole depths can order pipes cut to the length they need, which reduces joints, fittings, labor and offcut waste.
- Virgin PVC resin. Pipes are made from pure, virgin pipe-grade resin, not recycled plastic, for consistent wall thickness, strength and a long service life.
- ISO-certified production with quality control. Every batch is produced under strict quality checks, so your 4-inch thick pipe today matches the one you bought last quarter.
- One supplier for the full job. Water supply, drainage, sewer, borehole and electrical conduit pipes from one factory means one order, one delivery schedule and one point of contact.
- Location that cuts delivery cost. Sango Ota sits close to Lagos and the major routes into the southwest, which keeps haulage costs down for sites in Lagos, Ogun, Oyo and beyond. The company provides sales and support across Nigeria.
- Product guarantee and responsive support. Contractors, distributors and retail customers get a guarantee on products and a sales team that responds quickly to orders and questions.
For more on judging pipe quality, read our guide to the best PVC pipes in Nigeria and what to look for before you buy, and compare suppliers in our list of the top PVC pipe manufacturers in Nigeria.
Frequently Asked Questions About PVC Pipe Prices in Nigeria
What is the price of a 4-inch PVC pipe in Nigeria?
A 4-inch (110mm) PVC pipe costs about ₦3,500 to ₦5,000 per 3-meter length for light drainage grade, ₦5,000 to ₦7,500 for medium grade, and ₦10,000 to ₦18,000 for thick pressure grade, as of November 2026. A 6-meter length costs roughly twice as much.
How much is a ½-inch PVC pipe in Nigeria?
A ½-inch (20mm) PVC pipe sells for about ₦600 to ₦2,500 per 3-meter length, depending on wall thickness and brand.
What is the price of a 6-inch borehole casing pipe in Nigeria?
A 6-inch (160mm) thick casing pipe typically costs ₦18,000 to ₦30,000 per 3-meter length, and more for 6-meter lengths or extra-thick walls. Borehole pipes should always be thick grade, because they carry soil pressure and pump loads.
Is uPVC the same as PVC?
In Nigerian plumbing, most rigid “PVC” pipes are uPVC (unplasticized PVC). The term matters less than the wall thickness and pressure class, so always compare those.
Why do PVC pipe prices differ so much between shops?
Differences in wall thickness, pressure class, length (3m vs 6m), resin quality, brand and the number of traders between the factory and the shop explain most of the gap.
Is PVC cheaper than GI pipe in Nigeria?
Yes. A 2-inch PVC pipe costs a fraction of a 2-inch GI pipe, and PVC is lighter to transport, faster to install and does not rust. GI is still used where a specification calls for steel.
How do I know a PVC pipe is good quality?
Look for an even wall thickness all around the pipe, a smooth inner surface, clear manufacturer markings, no cracks or bubbles, and a supplier who can state the resin used and the pipe standard. Very light, flexible or chalky pipes are a warning sign.
Do PVC pipe prices change often in Nigeria?
Yes. Prices follow PVC resin costs and the naira exchange rate, and they can change within weeks. For projects, ask your supplier for a written quotation with a validity period, or a price hold for phased deliveries.
Can I buy PVC pipes directly from a factory in Nigeria?
Yes. Manufacturers such as ALL TIME PIPES in Sango Ota sell directly to contractors, plumbers, distributors and project buyers at wholesale prices. Contact the sales team with your bill of quantities for a quotation.
Get Today’s Wholesale PVC Pipe Price from ALL TIME PIPES

The fastest way to get an accurate PVC pipe price in Nigeria is a written quotation for your exact specification and quantity. Send ALL TIME PIPES your bill of quantities and get factory-direct wholesale pricing, delivery options and lead times.
Include these details for a faster quote:
- Pipe sizes (mm or inches) and quantity for each
- Use for each line: water supply, drainage, sewer, borehole or electrical conduit
- Wall class or pressure rating, if specified
- Preferred lengths, including any custom lengths
- Delivery location and the date you need the pipes on site
Planning a large project? Book a factory or site visit. See production, inspect pipe quality, and agree a supply schedule with the team before you commit.
Contact ALL TIME PIPES (All Time Packaging Nigeria Ltd)
- Call or WhatsApp: 0810 884 8962 or 0708 271 7791
- Email: Alltime.packaging@gmail.com or sales@alltimepackaging.com.ng
- Factory and office: Opposite Fidson Pharma, Sango Ota, Ogun State
- Hours: Monday to Saturday, 9:00 a.m. to 6:00 p.m.
Contact Us or Request a quotation or book a site visit today
Sources used
- ALL TIME PIPES product page and All Time Packaging homepage
- Jiji.ng: plumbing pipes and fittings, Nigeria and Lagos
- Jiji.ng: 6″ PVC pipe, Lagos
- Jiji.ng: 4″ PVC pipe, Orile
- Frakem: pressure pipes and PVC pipes
- Jiji.ng: galvanized pipes and CPVC pipes
- IndexBox: Nigeria PVC in primary forms market report
- Opinion Nigeria: dollar to naira rate, November 6, 2026



